Some details to pay attention to when logging chain saws

When using a logging chain saw, you must use two hands to hold the chain saw firmly, and grasp the front handle with your right hand, even if you are accustomed to using the left hand; when you start work, you should open the chain saw to its maximum throttle Then there is clamp clamping; clamp clamping is very important if not the chain saw will pull people backwards. Always pay attention to the surrounding environment, calm and sober tasks; in slope tasks, the user must stand on the upper part of the tree trunk or face it. Pay attention to the rolling of trees, and avoid the risk of tripping over tree stumps, branches, and ditches. When sawing trees with debris, be aware that wood chips that split with sawing will pose a risk; pay special attention to the damage of trees. Naturally inclined, the branches are particularly luxuriant. Pay attention to the wind direction and wind. Do not cut trees if the wind is too strong; there must be an interval of 2.5 times the length of the felled trees between tasks, so that logging does not endanger the safety of others.

In felling, some loggers pay attention to felling trees with large diameters, and despise felling trees with small diameters, that is, when felling large trees, they follow the logging operation rules and dare not sloppy. However, when cutting small trees, I don't pay attention to it. Sometimes I don't even cut the hawthorn (large wiping the head). This is very risky. There are many examples of accidents caused by despising young trees in logging. This is due to the light weight of the trunk of the small tree and the low pressure, so when the tree falls, it changes direction when it encounters a little resistance. The sensitivity is high. It is either turning back or swinging to the stump, which is very risky. Therefore, when felling small trees, you must follow the felling operation rules to ensure safety.

When chain saws are relatively closed or poorly ventilated indoor tasks, even chain saws with exhaust catalytic mufflers can not be used, it is very likely to be poisoned in this environment; relatively do not stand on the trunk when logging Saw, don't saw the hanging branches from above.

Logging chain sawss have certain risks, and the probability of accidents is relatively high. Therefore, in order to ensure safety, the safety task of chain saw logging operations is to grasp the key link. Before stopping forest logging operations, you must do a good job of self-reflection, maintenance and maintenance of the chain saw, and carefully protect and use the chain saw. In addition, you should also pay attention to the safety of logging from time to time. . For example, in the logging process, when a deformed tree is found, certain safety measures must be taken to stop logging, and the practice of focusing on big trees belittling small trees must also be avoided, and operations must be stopped in accordance with forestry consumption safety technical regulations.

When logging, loggers must take precautions against deformed and strange trees, such as a bent tree, a double tree, a "child-holding" tree, and a crooked neck tree. Before logging, the woodcutter must first examine the appearance and characteristics of the tree in detail, determine which elements are likely to be unsafe after the tree is felled, and then work out safe, reliable and feasible safety measures. If you don't have a good grasp of safe consumption or it is not conducive to safe consumption, no logging will be done. After necessary safety measures have been taken, logging will be performed.