Use and maintenance knowledge of filling machine

Filling machine plays an insignificant role in the current processing industry. It is one of the necessary equipment for the production and processing of many food, beverage, pharmaceutical, and daily chemical enterprises. It plays an increasingly important role in our lives. For cosmetic machinery manufacturers & enterprises, the use of filling machines is not a problem, but few people know about its maintenance and maintenance.

First: Before using the filler, brush and rinser:

1. Install and then debug. Before debugging, read the manual carefully and prepare the things you use.

2. After the automatic filling machine, bottle brushing machine and bottle washing machine are installed, adjust the filling track and bottle receiving tray to be level, the liquid storage tank is full of materials, and all electrical switches are in the closed position.

3. The filled container is inserted into the tooling box, and the external power supply is connected. The power socket must be a three-pin socket with a solid ground wire to avoid electric shock if the casing leaks. Turn the machine power switch to ON, and the power indicator light will be on. .

4. The mounting support plate supports the filling rack, and pushes the positioning sleeve on the filling head upward with your fingers. The positioning sleeve should be able to move up and down flexibly, and the filling needle in between is exposed or retracted without obstruction.

5. Turn the switch under the liquid storage tank to the open position, so that the material can flow into the total metering pump. According to the total filling amount of each container, adjust the screw on the crank, and turn the knob of the filling speed control plate to 20 degrees. Left and right, and then turn the switch on the filling speed control board to the open position.

6. When the liquid flowing out of the filling head is the set amount, tighten the liquid volume fine-tuning nut, cover the casing of the filling head, and loosen the support plate of the filling frame.

After the filling machine is used, it is necessary to pay attention to its maintenance. When disassembling and washing the piston and the fixing screws during maintenance, it is necessary to remove the first one from affecting the process requirements of the other. Before cleaning the piston filling machine, the remaining products in the filling machine should be removed and cleaned, and then the material barrel should be filled with soft cleaning solution. The cylinder has been lubricated before leaving the factory. Please do not open it or add any lubricating oil to ensure that the surface of the filling machine is clean and clean, and power off when not in operation. In addition, while insisting on maintaining and using the filling machine correctly, it is necessary to carry out regular inspection and debugging. Only in this way can the filling machine work in a healthy and stable manner.

With the continuous improvement of living standards, people's demand for beverages and daily chemical products continues to increase, enterprises continue to develop, and more and more cream filling machine, lotion filling machine, beverage filling machines, bottle brushing machines and bottle washing machines are used. The problem of attention is also becoming more and more acute, so for the better production of the enterprise, its maintenance is still very necessary.